Basic Info.
Water Absorbtion Rate
0.05%
Dry Penetration Test
15min
Material
Epoxy Resin ,Fiberglass,Firming Agent
Application
Composite Insulator/Arrester/Cut-out Fuse
Type
Insulator Rod,E-Glass and ECE-Glass Rod
Trademark
TAPOREL ELECTRICAL
Product Description
Leading manufacturer of electric insulating materials and insulation products !
1. Company Profile:
1.Capacity: 100 Pultrusion lines, the largest manufacturer of composite insulator rods in China.
2.Technique: the only one using vacuum injection technique without mould release agent, Patent No.200610041850.1.
3.Test: Rods passed tests in domestic labs, including WHVRI,CEMT,XIHARI, especially passed KEMA tests in the Netherlands and 7200h stress corrosion test.
4.Standards: IEC61109 IEC61952, ANSI C29.13-2000, GB/T19519,DL/T810 DL/T864
5.Application: The rods of Taporel have been applied in the highest voltage(1000kv) AC transmission lines & applied in the highest voltage(±800kv) DC transmission lines.
2. Development of rods
Development of composite insulators in China initiated in 1980s. First composite insulators in China came out in 1988,with110kV.
In October of 1996,Taporel introduced her first epoxy pultrusion fiberglass rod,using technology of China XD group Co., during her start-up phase.
In October of 1998, second generation of thermo-resistant FRP rods (155ºC) came out from Taporel.
199810(155ºC).
In October of 2001, the brittle fracture of composite insulators caused concern of Chinese experts. Acid resistant FRP rods (ECR-glass rods) were required for application. Hence Taporel launched acid-resistant, thermo-resistant FRP rods in July of 2002.
In October of 2004, facing the problem of the high partial discharge of support rods for metal oxide arresters (MOA),Taporel developped the Vaccum Injection FRP rod (RIM) as the result of technological breakthrough by Taporel engineers, and the technology was applied to batch production.
In May of 2005, the FRP rods for composite insulators passed type tests based on relevant technical requirements of IEC 61109 standard at KEMA laboratory in the Netherlands.
3. Specifications
Diameter 5mm-130 mm; Length according to customer's order
4.Classify
3.1. Type
Based on properties, rods are classified into High temperature resistant type (E-glass Rod) and High temperature & acid resistant type (ECR-glass Rod).
3.2 Based on properties, rods are classified into High temperature resistant type (E-glass Rod) and High temperature & acid resistant type (E-glass Rod)
3.3Based on application, fiberglass rods are classified into 7 types:
for composite suspension & tension insulators (Diameter 16mm—40mm)
for composite pin insulators((Diameter 24mm---53mm)
for composite cross arm insulators(Diameter 28mm—80mm)
for composite post insulator (Diameter 28mm—130mm)
for composite surge arresters(Diameter 5mm—40mm)
for composite fuse cutout (Diameter 19mm—36mm)
3.3. Color: Light green, brown, black
5. Characteristics of rods
Vacuum immersion technique;
No mould release agent (Patent No.ZL2006100418501);
Passed KEMA type test at Netherland Laboratory;
ECR Rod has passed the 7200h stress corrosion test;
Good performance in bonding with silicone rubber housing;
The rods of Taporel have been applied in the highest voltage(1000kv) AC transmission lines;
The rods of Taporel have been applied in the highest voltage(±800kv) DC transmission lines.
Taporel people warmly welcome friends both domestic and abroad to visit our company
and have sight viewing of Xi'an, the ancient capital of China.
Address:
No. 9 Jingwei, 10th Road, Jinghe Industrial Zone, Xi′an, Shaanxi, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 14001, ISO 9001
Company Introduction:
The products of taporel include the Vacuum Injection Composite Insulator Rods, Epoxy Resin Glass Filament Winding Tube, Epoxy Resin Glass Cloth Winding Tube, Foam Filled Tube, Hollow Composite Insulator Sleeve, as well as the other over ten series. All of these products have been widely applied in electrical insulation equipment manufacturing. Taporel is the first choice for manufacturers of composite suspension insulator, composite pin insulator, conductor spacer, composite sleeve zinc oxid lightening arrester, high voltage current limiting fuse.
Taporel people warmly welcome friends of both domestic and abroad to visit the company and have sight viewing in Xi′an, the ancient capital of China.